電工鋼硅鋼片Ultra-thin series: B15AHT1000, B15AHT1200, B15AT1000, B15AT1200B15AT1500, B15AT1550, B20AHT1000, B20AHT1200, B20AT1000, B20AT1200, B20AT1500, 20WTG1200, 20WTG1500 20WTG1550 B25AHV1200 B25AHV1300, B27AHV1400, B27AV1400, B30AHV1500 B30AHV1400, B35AV1700 B35AV1800High performance series: B35AH300, B50AH300, 50AH470, 50AH600, 50AH800, B50AH470, B50AH600, B50AH800, B50AR300, B50AR600, B50AR500, B50AR350, B20AT15000.35 series: B35A200, B35A210, B35A230, B35A250, B35A270,B35A300, B35A360, B35A440, B35A550, B35AH300, B35AR300, B35AY-10.5 series: B50A250, B50A270, B50A290, B50A310, B50A350, B50A400, B50A470, B50A600, B50A700, B50A800, B50A1000, B50A13000.65 series: B65A470, B65A530, B50A600B65A700, B65A800 B65A1000, B65A1300Super thick Series: 70WK340, 75WK400, 80WK420, 85WK450, 10W800 WFC-100A, silicon steel sheet performance: A low iron loss. As an important indicator of quality, each country divides the grade by the iron loss value. The lower the iron loss, the higher the grade and the higher the quality.B. High magnetic induction strength. Under the same magnetic field, the silicon steel sheet with high magnetic sensitivity can be obtained. The volume and weight of the iron core of the motor or transformer made by it are relatively small, which can save silicon steel sheet, copper wire and insulating materials, etc.C. High stacking coefficient. The surface of the silicon steel sheet is smooth, flat and uniform in thickness, which improves the stacking coefficient of the iron core.D. Good punching property. This is more important for manufacturing small and micro motor iron cores.E. The surface has good adhesion and weldability to the insulating film.

電工鋼硅鋼片厚度7.3.1.1 公稱厚度產品的公稱厚度為 0.35mm、山西運城當?shù)?.50mm、山西運城當?shù)?.65mm 三種厚度規格。7.3.1.2 厚度允許偏差厚度允許偏差包括以下三類，其中包括：— 同一個驗收批內公稱厚度的允許偏差，簡稱公稱厚度允許偏差；— 平行于軋制方向（即鋼帶長度方向）的一定長度（2000mm±200mm）范圍內，鋼帶縱向上各點的Q/BQB 480－20217實際厚度之間的偏差，以下稱縱向厚度差；— 垂直于軋制方向（即沿著鋼帶寬度方向），鋼帶距離邊部不小于15mm 及橫向?qū)挾戎虚g位置，各點的實際厚度之間的偏差，以下稱橫向厚度差。產品的厚度允許偏差應符合表 5 的規定，帶鋼允許厚度負偏差交貨。