還有一種食品級橡膠軟管泵，它的內襯的橡膠層需要達到了食品衛生的要求，同時也需要符合EHEDG或者其他衛生級的要求。還有三元乙丙橡膠軟管泵，這種一般適用于絕大多數腐蝕性的化學物質和無機物，內襯橡膠層由三元乙丙橡膠構成，外層也是完整的三元乙丙橡膠。這樣的軟管具備很強的抗化學腐蝕的特性。以及CSM軟管泵，它適用于特別腐蝕性的化學介質，如：強氧化溶劑。軟管的內層是CSM，外層是天然橡膠。運行溫度達到85℃/185°F。

There is also a food-grade rubber hose pump. Its rubber layer must meet food hygiene requirements, and it must also meet EHEDG or other sanitary requirements. There is also a EPDM hose pump, which is generally suitable for most corrosive chemicals and inorganic materials. The inner rubber layer is composed of EPDM rubber, and the outer layer is also a complete EPDM rubber. Such hoses have strong chemical resistance. And CSM hose pump, it is suitable for particularly corrosive chemical media, such as: strong oxidizing solvents. The inner layer of the hose is CSM and the outer layer is natural rubber. Operating temperature reaches 85 ° C / 185 ° F.

軟管泵屬于蠕動泵的范疇，主要是由一根特制的橡膠軟管，對應泵體內轉子總成上的一對壓輥，當壓輥沿著橡膠軟管轉動時，壓輥與泵殼產生的擠壓力將橡膠軟管壓扁，在軟管自身彈性和側導輥的強制下，通過恢復原狀產生的真空吸入流體物料，物料在壓輥的機械擠壓下從管內排出，如此往復循環，從而達到連續輸出物料的目的。

The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.

 

當齒輪連續轉動時，當兩嚙合點在節點兩側對稱位置時，閉合體積逐漸減小。引進潤滑泵的葉片泵。為了讓您更好的了解我們的產品，并向您講解齒輪油泵的保養方法：潤滑頻繁，電動油桶泵高速運轉，潤滑脂易揮發，所以必須保持軸承處的潤滑清潔，并注意更換。利用泵控技術制作環件，可以提高數據的應用率，簡化制造工藝，節省數據和加工時間，如目前普遍采用耐磨泵管制作的泵管、管件等。從結構上看，它像一個單向閥，所以也可以參考單向閥的維修方法。