豫信致誠機械設備(貴港市分公司)位于中站李封南會253號。地理環境優越，交通便利。我司主要是以生產 水渠機等產品為主的一家企業，公司嚴格執行ISO9001：2000質量管理體系標準，不斷根據市場需求來改進完善現有的產品，實時開發新產品，公司主要產品 系列： 水渠機等系列。公司宗旨是“質量di yi 用戶之上 科技為本 不斷創新”，用z u i低廉的價格創造z u i優質的產品， 我們熱忱期待著與您攜手合作，謀求共同發展，開創二十一世紀新紀元。
多用途移動泵站的主要用途：
多用途移動泵站基于泵設計開發，大流量軟管泵是市政給排水中常用的一種泵型，擁有大量的潛在用戶，其產品主要用于污水、初沉污泥、濃縮污泥等的抽排輸送。由于轉子泵具備自吸能力強、耐干轉、流量范圍大、耐磨損的特點受到國內設計單位和使用單位的青睞。
The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.
工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
軟管泵具有輸送強研磨性介質的能力。它無閥、無密封，同介質接觸的 部件是橡膠軟管的內腔，壓縮軟管的轉子完全獨立于介質之外。
The hose pump has the ability to transport strong abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner cavity of the rubber hose. The rotor of the compression hose is completely independent of the medium.
