電工鋼硅鋼片Ultra-thin series: B15AHT1000, B15AHT1200, B15AT1000, B15AT1200B15AT1500, B15AT1550, B20AHT1000, B20AHT1200, B20AT1000, B20AT1200, B20AT1500, 20WTG1200, 20WTG1500 20WTG1550 B25AHV1200 B25AHV1300, B27AHV1400, B27AV1400, B30AHV1500 B30AHV1400, B35AV1700 B35AV1800High performance series: B35AH300, B50AH300, 50AH470, 50AH600, 50AH800, B50AH470, B50AH600, B50AH800, B50AR300, B50AR600, B50AR500, B50AR350, B20AT15000.35 series: B35A200, B35A210, B35A230, B35A250, B35A270,B35A300, B35A360, B35A440, B35A550, B35AH300, B35AR300, B35AY-10.5 series: B50A250, B50A270, B50A290, B50A310, B50A350, B50A400, B50A470, B50A600, B50A700, B50A800, B50A1000, B50A13000.65 series: B65A470, B65A530, B50A600B65A700, B65A800 B65A1000, B65A1300Super thick Series: 70WK340, 75WK400, 80WK420, 85WK450, 10W800 WFC-100A, silicon steel sheet performance: A low iron loss. As an important indicator of quality, each country divides the grade by the iron loss value. The lower the iron loss, the higher the grade and the higher the quality.B. High magnetic induction strength. Under the same magnetic field, the silicon steel sheet with high magnetic sensitivity can be obtained. The volume and weight of the iron core of the motor or transformer made by it are relatively small, which can save silicon steel sheet, copper wire and insulating materials, etc.C. High stacking coefficient. The surface of the silicon steel sheet is smooth, flat and uniform in thickness, which improves the stacking coefficient of the iron core.D. Good punching property. This is more important for manufacturing small and micro motor iron cores.E. The surface has good adhesion and weldability to the insulating film.

電工鋼硅鋼片一般要求電機、內蒙古阿拉善當?shù)刈儔浩骱推渌娖鞑考矢?，耗電量少，體積小和重量輕。電工鋼板通常是以鐵芯損耗和磁感應強度作為產品磁性保證值磁感應強度是鐵芯單位截面積上通過的磁力線數，也稱磁通密度，它代表材料的磁化能力，單位為T。電工鋼板的磁感應強度高，鐵芯的激磁電流（也稱空載電流）降低，銅損和鐵損都下降，可節省電能。當電機和變壓器功率不變時，磁感應強度高，設計Bm可提高，鐵芯截面積可縮小，這使鐵芯體積減小和重量減輕，并節省電工鋼板、內蒙古阿拉善當?shù)貙?dǎo)線、內蒙古阿拉善同城絕緣材料和結構材料用量，可降低電機和變壓器的總損耗和制造成本，并且有利于大變壓器和大電機的制造、內蒙古阿拉善同城安裝和運輸。